DESCRIPTION
The TrakFast tool is a self-contained, fully
portable tool that uses liquid hydrocarbon
fuel to power a unique linear drive internal
combustion motor .
In order for you to fully understand the
information contained in this manual, you
need a basic understanding of the tool . As
you can see in the illustration below, the
TrakFast tool is made up of three assemblies:
the Handle, the Motor, and the Magazine .
As you examine the TrakFast tool, become
familiar with the three major assemblies
and the various components located in
each of them .
The Handle Assembly contains the Fuel
Cell, the Battery Voltage Indicator Light,
and the Trigger .
The Motor Assembly contains the Cover
and Filter, the Motor Housing, the Nose,
and the Work Contacting Element .
The Magazine Assembly contains the
Magazine Locking Knob, the Battery
Compartment, the Follower Release
Lever, the Follower, and the Lockout Bar .
SPECIFICATIONS
Dimension:
Height 15 .5 inches
Length 17 inches
Weight:
8 .375 pounds
Cycle Rate:
Intermittent Operation 2 to 3
pins per second Continuous Operation 1000
pins per hour
NOTE:
Exceeding these rates could cause
the tool to overheat, resulting in loss of
performance or damage to tool components .
By using the TrakFast tool at its recom-
mended operation rate you will be able to
drive several thousand fasteners in a typical
workday .
Maximum Fastener Length:
1-1/2 inch x .109 dia . shank
Magazine Capacity:
42 fasteners .
Battery Cell:
6 volts D .C .—Provides enough
energy to drive approximately 3000 fasteners
on a full charge .
Fuel Cell:
Liquid hydrocarbon—Provides
enough fuel to drive up to 1000 fasteners .
AN OVERVIEW OF THE TRAKFAST TOOL
3
AN OVERVIEW OF THE TRAKFAST TOOL
Fuel Cell
Compartment
Magazine
Locking Knob
Battery Compartment
(opposite side)
Follower
Release Lever
Follower
Lockout Bar
Nose
Motor
Housing
Cover and
Filters
HANDLE
ASSEMBLY
MOTOR
ASSEMBLY
MAGAZINE
ASSEMBLY
Battery Voltage
Indicator Light (on
right side of handle)
