5
CARTON CONTENTS
1. Vacuum pump SDP1
2. Air hose
3. Instruction manual
DO NOT OPERATE THIS TOOL UNTIL YOU READ AND UNDERSTAND
THE ENTIRE INSTRUCTION MANUAL!
How to install the air hose
1) Unplug the machine
2) The supplied air hose is equipped with the quick fitting coupling. Push on the quick
fitting coupling and it will snap down. Double check to ensure that the air hose is fully
locked onto the vacuum pump and the drilling rig.
Warning buzzer
For safety reasons the tool is equipped with the warning buzzer. It will buzz if the
vacuum is under -0,7 bar.
STARTING AND STOPPING THE TOOL
Make sure that the power circuit voltage is the same as shown on the specification plate
of the machine and that the switch is “OFF” before connecting the tool to the power
circuit.
The tool must be plugged into an outlet properly installed and grounded in accordance
with all codes and ordinances.
Never remove the grounding prong or modify the plug in any way.
