07.2019
Depress tool, tool does not click and load does not fire
Is the barrel fully closing? If No
1. Barrel installed backward
2. Front Collar not installed correctly
3. Pawls incorrectly positioned behind piston
4. Debris in receiver or around barrel
5. Cocking rod loose/damaged
Tool is difficult to close the front end or sticks at times
Cause - Tool is dirty or has a broken component
1. Clean front end of tool
Follow instruction in this manual
Follow instruction in RA27 operator’s manual
Watch video on Ramset You Tube channel
Tool trigger does not fully return.
Cause
– Tool strip tracks are dirty
1. Clean tracks where powder load strip rides through tool
2. Damaged advance lever or advance lever spring
