RA27 SERVICE
BACK END / ADVANCE LEVER
38. Place the Rear Handle and
Swivel Hook Assembly on to the
tool housing
39. Insert the Firing Pin Spring
40. Locate the metal back cap / Fixed
Hook Assembly, the long screws
and the tube spacers.
The spacers can be inserted into
the Mech. Housing first. The
alternate method is to place the
rear screws through the back end
cap and then slide the tube
spacers over the screws. The
assembly can be placed into the
back end of the tool.
Be sure to capture the Firing Pin
Spring with the post protruding
from the metal back cap.
41. When tightening the back end
screws, the torque spec is 26 to
28 in/lbs. Blue Loctite is
recommended on these screws.
