RAMSET M CLASS, Owner'S Manual

Page: 5 / 12

- 05 -
1600W M CLASS Wet/Dry Vacuum Cleaner Owners Manual
8
BEforE usE
When unpacking, check that the delivery is complete and that there is no transport
damage. Before using, the operators should be provided with information,
instructions and training for the use of the vacuum cleaner and the substances that it
is to be used for, including the safe procedure for the removal of the gathered
material.
INDICATor AND opErATINg ELEmENTs
Select from the following functions and settings:
0
Vacuum cleaner is switched
off
- Plug socket current-conducting
I Vacuum cleaner is running
- Plug socket current-conducting
- Automatic shaker function off
A
Ready for operation
- Plug socket current-conducting
- Automatic shaker function off
AC
Ready for operation
Automatic shaker function
- Plug socket current-conducting
- Automatic shaker function on
- The vacuum cleaner is switched on and off via the
connected electrical/compressed air tool* at the
plug socket.
Automatic shaker function - Automatic shaker function on; 2min
Fill level indicator * ⑥
- When the container is full and/or there is a block-
age in the suction hose, the full indicator lights up.
A
n acoustic signal is also emitted.
Speed regulation * ⑦
- The suction performance can be regulated using
the speed regulator.
Setting the suction hose
diameter * ⑧
- Determine the maximum negative pressure for
automatic shaking.
(*depending on the equipment variant of your vacuum cleaner)
- 05 -
9
EL
CommIssIoNINg
Switching on and off
CAuTIoN: Electric tools and compressed air tools must be switched off when
they are connected.
The plug socket on the vacuum cleaner will always be live when the mains plug is
plugged in, irrespectively of the position of the switch.
NOTE: If the switch is in the >0< position, the plug socket on the vacuum cleaner
can be use as an extension lead.
Connection value: Vacuum c connected unit, maximum 16 A.
Insert the plug into socket
0 Vacuum cleaner is switched off
I Vacuum cleaner switched on without shaker function
A
Vacuum cleaner on standby
Vacuum cleaner switched on without shaker function
Ready mode for ON/OFF automatic mode.
(Suction unit is switched ON/OFF by the electrical tool)
AC
Vacuum cleaner on standby
Ready mode like “A” plus automatic filter cleaning.
The vacuum cleaner only switches on when the tool is switched on.
After the tool is switched off, the vacuum cleaner runs on for approx. 10 sec
to prevent any residue from collecting in the hose.
Set the vacuum cleaner to the switch position >0<.
Pull out the plug after you have finished.
Fix the suction hose in the accessory storage location* on the back of the container
for storage.
The ends of the hose can be pushed into each other to prevent particles of dirt from
coming out.
CAuTIoN:
selector switch for minimum material flow (horn and light)
on vacuum cleaners classes “m” and “H”
In the modes >AC< and >A< the following setting is made, depending on the
diameter of the hose:
Inside diameter of the hose Switch position
Ø 35 mm 70 m³/h
Ø 27 mm 40 m³/h
Ø 21 mm 20 m³/h
No speed regulation is carried out. The vacuum cleaner always runs at max. speed.
GB