Insul
Fast
™
GT3
Instruction Manual
3
IMPORTANT: READ THIS INSTRUCTION
BOOK COMPLETELY BEFORE
ATTEMPTING TO USE THIS
TOOL
The Pulsa
™
Gas Technology Fastening System
Pulsa
™
Gas Powered Tools have been designed with
productivity in mind. The InsulFast
™
GT3 tool has been
designed for fast efficient fixing of a wide variety of
insulation to concrete and steel. This system provides very
fast consistent fixing in a variety of material types and
strengths.
The InsulFast
™
GT3 Gas Powered System consists of a tool,
fasteners and a fuel cell. The fasteners are supplied
boxed along with a fuel cell.
This patented technology ensures you can carry out
maximum installation in a given period with minimum
fatigue to the operator. Pulsa
™
Gas Powered Tools are
manufactured to the highest standard utilising world
best practices.
Important
No one should attempt to operate a Pulsa
™
Gas
Technology tool before reading this manual.
Do not undertake to use this Gas Technology tool
without adequate, competent personal instruction and
careful study of this instruction book and any local
Government Regulations.
The manufacturer disclaims all responsibility for any
incidents which may result from the disregard of these
operation procedures and maintenance instructions, or
the disregard of any local or statutory authority
regulations pertaining to the use of Gas Technology tools.
To promote safe working conditions, the following
safety precautions should be observed in the use of
Gas Technology Fastening Tools.
