Insul
Fast
™
GT3
Instruction Manual
10
SAFETY WARNING
For operations not included in this
manual, consult any authorised Ramset
™
Tool Service Centre.
Before performing any servicing ensure
that the battery and fuel cell are
removed from the tool.
Servicing that can be performed by the user.
• Cleaning of filters.
• Inspection of fuel cell.
• Inspection of battery charger contacts.
Cleaning of filters
Remove the cover, remove the filters and lightly tap
them to remove any dust.
After cleaning, replace them and close the cover.
Cleaning of battery contacts
Periodically clean these contacts with a dry cloth.
The InsulFastGT3 tool is equipped with a quick change
fastener guide. This feature allows the user to quickly
replace the fastener guide and allows access to clear the
fastener guide if required.
The fastener guide can be changed or removed/assembled
without the use of tools by following these steps:
Removal
1. Remove battery from
the tool !
2. Firmly grasp the end of the
fastener guide and
turn it 90 degrees,
3. Pull the fastener guide
away from the tool.
Assembly
1. Remove battery from
the tool !
2. Orient the fastener guide so
that the notched or flat
portion is toward the back
of the tool and aligned with
one of the sides of the tool.
3. Firmly push the fastener
guide into the tool.
4. Twist the fastener guide
until it locks into place.
5. Insert the battery and
operate the tool.
Servicing
Quick Change Fastener Guide
Turn 90°
Pull
