DISASSEMBLY
DISASSEMBLY
14
TOOL DISASSEMBLY
1.
Unscrew the barrel retention collar
and slide it away from the tool hous-
ing. Handle the tool carefully after
the sleeve is unscrewed to prevent
the two barrel pawls from falling out.
2.
Remove the two pawls from the
slots in the sides of the tool
housing.
3.
Slide the barrel assembly out of
the tool body. Note the position of
the slots on the side of the barrel
assembly.
4. Slide the barrel retention collar off of
the barrel assembly.
5. Using an adjustable or 13 mm open
end wrench, grip the flats on the
end of the muzzle bushing and
unscrew the muzzle bushing from
the barrel assembly.
UNSCREW THE BARREL
RETENTION COLLAR
REMOVE BOTH PAWLS
SLIDE BARREL ASSEMBLY
OUT OF THE TOOL BODY
SLIDE RETENTION COLLAR
OFF OF THE BARREL
UNSCREW MUZZLE BUSHING
FROM BARREL ASSEMBLY
