4
Ramp Networks, Inc.
WebRamp M3 Quick Start
Installation Steps
Refer to the illustration and follow the simple steps below to quickly
install your WebRamp M3.
Step 1. Connect the WebRamp M3
1
Connect the serial modem cable from your modem to the Modem 1
port on the back of the WebRamp M3.
2
Connect the telephone cable from the wall outlet to the
Line In
port
of your modem.
3
Connect the modem power supply to the back of the modem, plug the
other end into a power outlet and then turn the modem on.
4
Connect the Ethernet cable from your Ethernet card to the Ethernet
port 1 on the back of the WebRamp M3.
Ethernet Ports
Ethernet Cable
RJ-45
Power
Modem Ports
RJ-45
WebRamp M3
Modem
Each computer must have a 10Base-T
Ethernet card and TCP/IP installed
Standard Serial Modem Cable
DB-25 (male) to DB-9 (female)
Telephone
Connection: use
standard telephone
cable
Connects to
Ethernet
Card
Connects to any
WebRamp M3
Ethernet port
Use this port
for Modem 1
Line In
DB-9
DB-25
10Base-T
Ethernet
Card
