Ramon Soler Soltronic 8102, Installation Instructions Manual

Page: 3 / 12

2
ENGLISH
INSTALLATION DRAWINGS
1. The tap should be firmly fixed. Any play may cause malfuction.
2. The distance between the sensor eye and the bottom of the basin should be less than 50 cm.
3. One should remove all foreign objects lying in front of the sensor eye after installation. Photogra
phic material should be stored or kept out of the sensor’s range, so as not to incur in unwanted tap
operation by accidental discharges.
REMARKS
TROUBLE SHOOTING
FAULT CAUSE ACTION
Fault low water flow
1. Debris in the valve
2. Eyet in the valve is jammed 1. Close the water via the triangle valve is
the font inver tube, ther clear debris out
No water
1. No DC supply
2. No AC supply when whing adapter
3. Water source turned off
1. Change new batteries
2. Check the power wide box and wait the
supply to return
3. Turn on the water adjustment screw
Attention: Connect RED to RED, and BLACK to BLACK
Sensor windows
Adaptor
Signal Output
(black)
DC input
(red)
DC Output
(red)
Signal input
(black)
Connect with Output
Connect with inlet (G 1/2)
L = 800 PVC pipe