1
ENGLISH
AC
&
DC INTERGRATIVE AUTOMATIC FAUCET
INSTALLATION INSTRUCTIONS
1. Infrared automatic ray operation, which procides touces free use and saving of water usage on
frushing devices.
2. Inductor is sensitive with quide action promoting health and safety.
3. All is included in the installations; the sensor device, valve, wires and PCB are installed in a control
box.
4. Inside there is an adaptor which can be used with an AC/DC supply. Batteries not included.
5. Use is safe, stable and can be connected to different water pressures.
6. This tapwares undergoes a discharge every 24 hours as a bacteria prevention system.
CHARACTERISTIC
1. Water pressure: 0,7 bar - 7,5 bar.
2. Clean water is necessary.
3. 4 pcs # 5AA (1.5 V) batteries or 230V / 50Hz AC supply .
INSTALLATION PARAMETERS
1. Keep the sensor eye clear. Keep out of the direct sunlight.
2. Using dry soft cloth to clean the sensor eye.
3. Do not use strong acidic cleansessuch as detergents, benzene, etc.
NOTICE FOR USE
TECHNICAL PARAMETERS
Power
AC 230V / 50 HZ
DC 6V
Sensor distance
Within 20 cm (to the sensor eye) are available
Water pressure
0.7 bar - 7.5 bar
Inlet thread
G 1/2”
Water temperature
O - 40º C
Please reading carefully the below installation before install the automaicfaucet to avoid any problems
Summary of Contents for Soltronic 8102
Page 10: ......
Page 12: ...1793850 www ramonsoler net ...
