COPYRIGHT © 2019 SANDVIK MINING AND CONSTRUCTION OY
Page 10 - Operation
Product introduction
RPV14R, RPV22R, RPV29R, RPV39R, RPV53R, RPV75R
Place a chain or sling as shown in the illustration to lift the product.
Note: The lifting eye screws must always be removed from the product and replaced
with a screw before operation.
SAFETY INSTRUCTIONS FOR LIFTING
Below are some common safety instructions concerning lifting operations. In
addition to this, the local, national standards for machines and lifting-tackles must
always be strictly observed. Please note that the list below is not all inclusive, you
must always ensure the procedure you choose is safe for you and others.
■
Do not lift the load over people. No one must be under the hoisted load.
■
Do not lift people and never ride the hoisted load.
■
Keep people clear from the lift area.
■
Avoid side pull of the load. Make sure you take up the slack slowly. Start and
stop carefully.
■
Lift the load a few centimeters and verify it before proceeding. Make sure the
load is well balanced. Check for any loose items.
■
Never leave the suspended load unattended. Maintain load control at all times.
■
Never lift the load over the rated capacity (see the product's operating weight
from the specification page).
■
Inspect all lifting product before use. Do not use twisted or damaged lifting
product. Protect lifting product from sharp corners.
■
Obey all local safety instructions.
MB010011
