
Hardware Reference Manual
PMC233/4/5 & PMC243/4/5 High Capacity Disk Solutions
2 Hardware Installation
This chapter provides unpacking, hardware preparation and installation procedures for the
PMC233/PMC243
modules.
2.1 Unpacking Instructions
RAMiX’s boards are protected by an anti-static envelope and/or wrapping. Observe anti-static precautions and
work at an approved anti-static workstation when unpacking the board.
Note
:
The units are shipped in an individual, reusable shipping box. When the shipping
container is received, inspect it for any evidence of physical damage. If the container is
damaged, request that the carrier’s agent be present during unpacking and inspection of
the unit.
Unpack the module from shipping carton. Check and verify that all items are present by referring to the packing
list.
2.2 Included Items
Each
PMC23X/PMC24X
is shipped with a corresponding PMC assembly.
2.3 Handling
Electronic assemblies use devices that are sensitive to static discharge; this applies to both the
PMC23X/PMC24X
and the host board onto which it will be mounted. Observe anti-static procedures when
handling these boards. The
PMC23X/PMC24X
should be in an anti-static plastic bag or conductive foam for
storage or shipment.
DDC No. Rx-URMH 090 Rev A
Issued 7 April 2002
8 of 27