
Hardware Reference Manual
PMC233/4/5 & PMC243/4/5 High Capacity Disk Solutions
3.7 Assembly Diagram
The
PMC23X/PMC24X
module is now ready for installation. Turn all system power off. Remove the host board
from the chassis (if currently installed). Locate the PMC connectors on the host board. Carefully plug the
PMC23X
or
PMC24X
into the mating connectors on the host's printed circuit board. Be sure module is seated
properly into CMC connectors on the host. Use screws to fasten module into host PCB.
1. Remove the four screws from the bottom of the stand-offs.
2. Line up the J1 and J2 connectors on the host PCB to the
PMC23X/PMC24X
J1 and J2 connectors.
3. Push
the
PMC23X/PMC24X
down, making sure all connectors are positioned properly.
4.
Use the four screws to connect the
PMC23X/PMC24X
stand-offs to the host PCB
.
DDC No. Rx-URMH 090 Rev A
Issued 7 April 2002
13 of 27