Ramix CP945FP-12 Hardware Reference Manual Download Page 12 | Manualshive

Page: 12 / 20

Ramix CP945FP-12 Hardware Reference Manual Download Page 12

Hardware Reference Manual

CP945FP-12 CompactPCI, RM945FP-12 VME, & RM948 With Embedded Layer 2
Switch, Front Input/Output

DDC No. Rx-URMH 122 Rev A
Issued 5 December 2003

11 of 18

3 Handling and Installation

3.1

Handling Precautions

Electronic assemblies use devices that are sensitive to static discharge. Observe anti-static procedures when
handling these boards. All products should be in an anti-static plastic bag or conductive foam for storage or
shipment. Work at an approved anti-static workstation when unpacking boards.

3.2 Unpacking and Verification

RAMiX products are shipped in individual, reusable shipping boxes. When receiving the shipping container,
inspect it for any evidence of physical damage. If the container is damaged, request that the carrier’s agent be
present during the unpacking of individual boxes and the inspection of each unit.

Remove the RM94X card from the shipping box and anti-static packaging. Verify that it is not damaged and that
all items are present by referring to the packing list.

3.3 Installation

Installation is done generically as with the commercial versions of the card. Follow any specific procedures
recommended by the manufacturer of the chassis used.

3.4 Cable Adapter Pin Outs

Both the CP945FP-12 and RM945FP-12 are designed for use with a female RJ45 to male DB25 cable adapter.
The cable adapter, RAMiX part number 06-0714025, is illustrated below, and can be wired using the DB25-1 and
DB25-2 cable pin outs shown below.

DB25-1 Pin Out

DB25-2 Pin Out

P1

P2 P1

P2

1 1 1 7
2 2 2 8

10 4 10 5
21 6 21 10

P1

P2

DB25

RJ45

P1

P2

DB25

RJ45

Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com

«
...
10
11
12
13
14
...
»

Summary of Contents for CP945FP-12





















Reviews:

No comments