5
Caution:
If the flame goes out accidentally, turn off the gas with the control knob and try to light it
again at least 1 minute later.
Convert to LPG/Propane use
1.
The package comes with 4 LPG/Propane burner orifices sealed in a small bag. User need to
replace the 4 burner orifices.
2.
User must procure a Propane gas pressure regulator, or use the one come with the gas tank. The
input pressure for LPG/Propane is 10 inch water. If user has trouble finding regulator, please
bring the tank to a local hardware store to fit a suitable one.
3.
After change the valve & regulator, user can choose to adjust the Propane gas flow.(in most
case this is not required)
Remove the knob, and adjust the flame with a tiny screwdriver (see fig.7 below).
To check the adjusted flame: turn the burner to maximum position for 10 minutes. Then
turn the knob into the saving setting. The flame should not extinguish nor move to the
nozzle. If it extinguish or moves to the nozzle, readjust the valves.
