background image

 

GENERAL INFORMATION

 

 
This  appliance  is  designed  for  domestic  household  use.  The  User  Manual  contains  important 
product safety & installation information.   
 
Your safety is of the utmost importance. Please ensure you read this booklet before attempting to 

install or use the appliance, and contact RambleWood Green if you have any question. 

                           
                                       

 

Safety Guideline 

 

Read these instructions carefully before installing or using this appliance. 

 

No combustible material or products should be placed on this appliance at any time. 

 

Please make this information available to the person responsible for installing the appliance as it 

could reduce your installation costs. 

 

In  order  to  avoid  a  hazard,  this  appliance  must  be  installed  according  to  these  instructions  for 

installation. 

 

This appliance is to be properly installed and earthed only by a certified technician per state/city 

safety code. 

 

Failure to install the appliance correctly could void any warranty or liability claims. 

 

Disconnect the appliance from electrical supply before carrying our any work or maintenance. 

 

Connection to a good earth wiring system is mandatory. 

 

Connection to the city gas supply line must be conducted by a qualified electrician, per city/state 

safety code. 

 

Gas  leakage  test  by  technician  after  installation  must  be  exercised,  before  turning  on  the  gas 

supply. 

 

Failure to follow this advice may result in gas leak, fire & explosion. 

 

Never  leave  the  appliance  unattended  when  in  use.  Under any circumstance the cookware should 

not be empty when the unit is on. 

 

Keep children away. 

 

Fat and oil can be ignited extremely quickly when overheated. When cooking with fat and oil the 

appliance should not be left unattended.   

 

Never use this appliance for heating the room.

Summary of Contents for GC4-50N









Reviews: