Ramblewood Green GC1-28N, User Manual

Page: 19 / 20

INSTRUCTION FOR GAS REGULATOR
1. Product Features:
This product is a low-pressure pipeline regulator valve, built-in regulator for gas products
THIS REGULATOR IS SET TO Natural Gas (NG) USE. If user wants to set to
LIQUEFIED PETROLEUM GAS (LPG) use, it needs to be set manually, detail see below
instruction.
Operating temperature: -20 ~51.5 .
℃ ℃
Inlet pressure setting: of natural gas 7in.wc; of liquefied gas 11in.wc.
2. The performance parameters of the following table:
OUTLET PRESSURE
(LPG)
OUTLET PRESSURE
(NAT)
INLET SIDE SCREW SHIPPED STATE
10±0.5 in.wc 5±0.3 in.wc 1/2NPT same as cooktop model
Note: Default setting, LPG regulator is with a RED bar mark. NG regulator is without it.
3. Installation Method:
 User to install the external gas hose, Threads can be coated with appropriate
amount of sealant to seal. User can also choose other sealing methods such as pipe
thread sealing tape.
 Gas regulator inlet / outlet valve pipe thread size is ½ inch NPT(North America
Standard)
 After installation, open the gas source switch, and check valve body with soap and
water connections for leakage test..
4. The gas kinds of conversion method:
THIS REGULATOR IS SET TO NG USE ONLY. Please follow instructions below if user
want to convert to LPG use,
 Use tools to turn counterclockwise to open the top cover (Figure 1)
 Turn adapter pin inside counterclockwise to release it from top cover assembly
19