Ramblegard
stay a step ahead
®
It stands out from its competitors,
is effective and it’s economical.
www.ramblegard.com
6.
Site Code (SC)
This is used for facilities that may have more than one wireless system in operation. The site code will ensure the pager only
receives signals for alarms in its own area.
In the programming menu first select “SC”
•
Press Option to highlight the setting, and (0-7) will begin flashing
•
0 = Receive All Signals
•
1-7 = Receive Only from Matching Site ID
•
Use Menu button to adjust the site code from 0-7
•
Press Option again to confirm the setting
7.
Clear Pager Memory (Cl)
It is recommended to erase the memory before programming.
To clear the memory select “Cl” – for clear – and then hold Cancel for ~5s. The screen will flash 0000000 several times and
automatically exit the menu.
NOTE: Once you have correctly configured the Wireless Jill, press and hold the OPTION button for ~3s to exit program menu then go
back to Step 2 for Normal operation.
4. Troubleshooting
•
Check whether the programming settings are configured correctly
•
Erase the pager memory and reprogram the settings
•
Contact your local distributor with details for further assistance
