82
SERVICING AND MAINTENANCE
Beauty Cover Removal/Installation
The engine beauty cover will need to be removed in
order to service the engine air cleaner filter or to
gain better access to the engine compartment.
Beauty Cover Removal
1. Lift up on the front two corners of the beauty
cover to unseat rubber ball socket fasteners.
Beauty Cover
2. Pull the cover forward to release rear guides
from rubber grommets to remove from the
vehicle.
Beauty Cover Attachment Points
Beauty Cover Installation
1. Install the rear guide posts into the rubber
grommets.
2. Push down on the front to seat the two rubber
ball sockets in the front of the cover.
Engine Air Cleaner Filter Inspection And
Replacement
NOTE:
The beauty cover will need to be removed to
access the engine air cleaner filter.
Engine Air Cleaner Filter Removal
1. With a suitable tool, fully loosen (ten)
fasteners on the engine air cleaner filter lid
and the air hose clamp.
Air Cleaner Filter
CAUTION!
No step! Maximum force on beauty cover and
engine air cleaner filter is 50 lb or less.
1 — Rear Grommets
2 — Front Ball Socket Fasteners
1 — Engine Air Cleaner Filter Cover
2 — Rear Fasteners
3 — Air Hose Clamp
4 — Front Fasteners
22_DT_TRX_SU_EN_USC_t.book Page 82
