RAM Truck 2500 2018, Supplement Manual

Page: 18 / 32

STARTING THE VEHICLE
Your vehicle uses the same starting procedures as de-
scribed in the Ram 1500/2500/3500 Owner’s Manual. No
special starting instructions are required.
NOTE: Periodically the vehicle will automatically switch
from operation on CNG to Gasoline for a short duration,
depending on conditions. This is done for a number of
reasons, including to maintain the freshness and appropri-
ate seasonal blend of gasoline, to ensure maintenance of
the gasoline injectors and/or to meet high-load demands.
FUELING THE VEHICLE
1. Open the fuel filler door.
1 — NGV 1 Receptacle
2 — Gasoline Fuel Filling Receptacle
NOTE: There is no fuel filler cap. A flapper door inside the
filler pipe seals the system.
2. Insert the fuel nozzle fully into the filler pipe – the
nozzle opens and holds the flapper door while refuel-
ing.
3. Fill the vehicle with fuel – when the fuel nozzle “clicks”
or shuts off the fuel tank is full.
4. Remove the fuel nozzle and close the fuel door.
Fuel Filler Door
16 STARTING AND OPERATING