RAM PROMASTER 2018, Manual

Page: 36 / 86

•
Although transmission shifting is performed automati-
cally, the vehicle will not
⬙
creep
⬙
when the brake pedal is
released, and may in fact roll down on an incline.
Leaving from a stop, the accelerator pedal must be
pressed to transmit driving torque to the wheels.
•
In Automatic Mode, the Automated Manual Transmis-
sion adapts the gear changing strategy evaluating the
road condition such as slopes in the road.
•
During low-speed driving conditions in first gear, ve-
hicle momentum changes may feel exaggerated in re-
sponse to changes in accelerator pedal position. This
behavior is normal and is similar to other vehicles
equipped with manual transmissions.
•
At low speeds you may hear mechanical noises similar
to a manual transmission as the transmission changes
gears. These noises are normal and will not damage the
transmission.
•
Very aggressive driving may result in some clutch odor.
A warning message will display in the instrument
cluster display if cool down actions are needed.
•
Before and after the engine is started, you may hear a
hydraulic pump for a short period of time. This noise is
normal and will not damage the transmission.
•
During extremely cold temperatures, the transmission
will not operate if the oil temperature is -22°F (-30°C) or
below. Normal operation will resume once the transmis-
sion temperature has risen to a suitable level. When
transmission actuation oil temperature is lower than
-22°F (-30°C), engine start will not be allowed. For this
reason the block heater is recommended below -17°F
(-27°C).
Manual (M) (Manual Mode)
In the MANUAL (M) position the driver is responsible for
choosing the best gear ratio to engage, depending on
driving conditions.
NOTE: Do not press the brake and accelerator pedals at the
same time. Use only one foot to operate the brake and
accelerator.
To operate in MANUAL (M) mode:
•
Press and hold the brake pedal.
•
Move the gear selector to the MANUAL (M) position.
The current gear will be displayed in the instrument
cluster.
•
To drive, release the brake pedal and press the accelera-
tor pedal.
34 STARTING AND OPERATING