MESSAGE
DESCRIPTION
Press Brake Shift To N Key To
Start
This message appears, after opening the driver's
door, to remind you to press the brake pedal and
shift the selector to NEUTRAL (N) to permit engine
cranking.
Parking The Vehicle
To park safely, it is essential to engage MANUAL (1st) gear, DRIVE (D) or REVERSE
(R) gear while your foot is on the brake pedal. Once MANUAL (1st) gear, DRIVE (D)
or REVERSE (R) gear is displayed in the instrument cluster, turn the engine off and
engage the parking brake. It is essential to wait until the gear engaged appears in the
display before turning the engine off and releasing the brake pedal. Always remember
to set your parking brake.
NOTE:
NEVER leave your vehicle with the gearbox in NEUTRAL (N) and always remember to
fully apply your parking brake. Always remember to set the parking brake when the
“Set Park Brake” message is displayed.
WARNING!
You or others could be injured if you leave the vehicle unattended without fully
applying the parking brake. The parking brake should always be applied when the
driver is not in the vehicle, especially on an incline.
ELECTRIC PARK BRAKE (EPB)
Your vehicle is equipped with an Electric Park Brake System (EPB) that offers simple
operation, and some additional features that make the park brake more convenient
and useful.
The park brake is primarily intended to prevent the vehicle from rolling while parked.
Before leaving the vehicle, make sure that the park brake is applied.
You can engage the park brake in two ways;
• Manually, by applying the park brake switch.
• Automatically, by the Auto Park Brake feature whenever the vehicle speed is below
1.25 mph (2 km/h) and the ignition switch is in the STOP/OFF position.
D I E S E L
94