Instrument Cluster Messages
Messages will be displayed in the instrument cluster to alert the driver when certain
unusual conditions occur. These messages are described below:
MESSAGE
DESCRIPTION
Transmission/Gearbox Fault
(Red)
When the ignition key is turned to ON/RUN/MAR,
the Transmission Fault Indicator light turns on and
should go off after a few seconds.
The Transmission Fault Indicator illuminates either
steady or blinking (together with this message and
a buzzer) to indicate a transmission fault.
Contact your authorized dealer if the message con-
tinues to appear.
Reduce Gear Changes
This message indicates that the driver is operating
the transmission incorrectly.
Incorrect use (by the driver) could automatically
activate a procedure for protecting the system.
Contact you authorized dealer if the message con-
tinues to appear.
Manual Mode Not Available
MANUAL (M) mode is not available, due to a fault
or other condition. Use the DRIVE (D) position to
operate the vehicle.
Contact your authorized dealer if the message con-
tinues to appear.
Automatic Mode Not Available
Automatic (DRIVE) mode is not available due to a
fault or other condition. Use MANUAL (M) mode to
operate the vehicle.
Contact your authorized dealer if the message con-
tinues to appear.
Clutch Overheating
This message appears, together with a buzzer,
when the clutch overheats.
In this situation, limit stop and go driving and gear
shifts or if necessary stop the vehicle and turn the
engine off to allow the clutch to cool.
If the message continues to appear, contact your
authorized dealer.
To avoid clutch failure, do not use the accelerator
to keep the vehicle at a standstill (for example
holding on a hill); the clutch could be damaged by
overheating. Use the brake pedal instead and oper-
ate the accelerator only when you are ready to drive
away.
D I E S E L
92