
CARRIER ASSEMBLIES
It is recommended that the primary and secondary carrier assemblies (18 & 19) be serviced entirely to
protect the integrity of the Wheel Drive.
LUBRICATION RECOMMENDATIONS
IMPORTANT:
WHEEL DRIVES ARE SHIPPED WITHOUT LUBRICANT AND MUST BE FILLED TO THE PROPER
LEVEL PRIOR TO START UP.
Observe lubrication recommendations given by the original equipment manufacturer. When specific
recommendations are not available, use mild extreme pressure lubricant API-GL-5, No. 80 or 90 when
filling the Wheel Drive under normal temperature ranges between 0 - 120
°
F (-18 to 49
°
C). Power
Wheel is to be half full of oil when unit is mounted level and horizontal. Use drain and fill plugs located
in cover and ring gear. Oil is to be changed after first 50 hours of operation with subsequent changes
every 1000 hours or yearly, which ever comes first. If unit is to be operated vertically, if ambient
conditions are outside the specified range, or if the oil temperature exceeds 200
°
F (93
°
C) contact RAM
Winch & Hoist for oil and level recommendations.
STORAGE
A protective film is applied to the Wheel Drive at the factory to prevent rust during shipment. Additional
protection may be required if the Wheel Drive is to be stored for an extended period of time.
SEALING COMPOUND
Silastic RTV732 sealer and General Electric Silimate RTV No. 1473 or RTV No. 1503 are currently
recommended for sealing gasket surfaces. Sealant should be applied in continuous bead, which should
be centered on the surface to be sealed but should move to the inside of the hole at each bolt hole
location. For service requirements order RAM Winch & Hoist part number 604101.
SPECIFICATIONS
Maximum intermittent output torque .......................................................... 130,000 lb. In. (14,690 Nm)
Maximum input speed ................................................................................ 5,000 RPM
Oil capacity……………………………………………………………………….57 oz (1,685 ml)
Summary of Contents for K5UR120ML-AM1G Series
