RAM 2015 1500, User Manual

Page: 154 / 292

Trailer Tow
• Push the UP or DOWN arrow button until the Trailer Tow icon is highlighted. The
screen will display the following information:
• Trailer Trip Distance
Audio
• Push the UP or DOWN arrow button until the Audio display icon is highlighted in
the EVIC/DID. This screen will display the current media source.
Screen Setup
• Push the UP or DOWN arrow button until the Screen Setup display icon is
highlighted in the EVIC/DID. Push the RIGHT arrow button to enter the Screen
Setup sub-menu. The Screen Setup feature allows you to change what information
is displayed in the instrument cluster as well as the location that information is
displayed.
UNIVERSAL GARAGE DOOR OPENER (HomeLink®)
HomeLink
®
replaces up to three hand-held transmitters that operate devices such as
garage door openers, motorized gates, lighting or home security systems. The
HomeLink
®
unit is powered by your vehicles 12 Volt battery.
The HomeLink
®
buttons that are located in the overhead console or sunvisor
designate the three different HomeLink
®
channels.
The HomeLink
®
indicator is located above the center button.
Before You Begin Programming
HomeLink®
Ensure that your vehicle is parked out-
side of the garage before you begin pro-
gramming.
For efficient programming and accurate
transmission of the radio-frequency sig-
nal, it is recommended that a new battery
be placed in the hand-held transmitter of
the device that is being programmed to
the HomeLink
®
system.
To erase the channels, place the ignition
switch into the ON/RUN position, then push
and hold the two outside HomeLink
®
but-
tons (I and III) for up to 20 seconds or until
the red indicator flashes.
Universal Garage Door Opener (HomeLink®)
Buttons
E L E C T R O N I C S
152