RAM 2015 1500, User Manual, Page: 13 / 292

NOTE:
In case the ignition switch does not change with the push of a button, the RKE
transmitter (Key Fob) may have a low or dead battery. In this situation a back up
method can be used to operate the ignition switch. Put the nose side (side opposite
of the emergency key) of the Key Fob against the ENGINE START/STOP button and
push to operate the ignition switch.
The Wireless Ignition Node (WIN) oper-
ates similar to an ignition switch. It has
four operating positions, three with de-
tents and one that is spring-loaded. The
detent positions are OFF, ACC, and ON/
RUN. The START position is a spring-
loaded momentary contact position.
When released from the START position,
the switch automatically returns to the
ON/RUN position.
Locking And Unlocking The
Doors
Push and release the UNLOCK button on
the RKE transmitter once to unlock the
driver’s door. Push and release the UN-
LOCK button twice within five seconds to
unlock all doors and the tailgate and the
RamBox
®
(if equipped). The turn signal
lights will flash to acknowledge the un-
lock signal. The illuminated entry system
will also turn on.
All doors can be programmed to unlock on the first push of the UNLOCK button.
Refer to Programmable Features in this guide.
Panic Alarm
1. Push the PANIC button once to turn the panic alarm on.
2. Wait approximately three seconds and push the button a second time to turn the
panic alarm off.
Key Fob
1 — Lock
2 — Unlock
3 — Remote Start
4 — Emergency Key Release
5 — Emergency Key
G E T T I N G S T A R T E D
11