RAM 1500 CLASSIC 2020 Owner'S Manual Download Page 190

Page: 190 / 360

188

STARTING AND OPERATING

ARK

ENSE

ARNING

ISPLAY

The ParkSense Warning screen is located within

the instrument cluster display. It provides visual

warnings to indicate the distance between the rear

fascia/bumper and/or front fascia/bumper and

the detected obstacle. Refer to “Instrument

Cluster Display” in “Getting To Know Your

Instrument Panel” for further information.
The ParkSense Warning screen will only be

displayed if “Sound and Display” is selected.
NOTE:

This feature can be programmed through the

Uconnect system. Refer to “Uconnect Settings” in

“Multimedia” for further information.

ARK

ENSE

ISPLAY

The warning display will turn on indicating the

system status when the vehicle is in REVERSE or

when the vehicle is in DRIVE and an obstacle has

been detected.
The system will indicate a detected obstacle by

showing a single arc in the left and/or right rear

regions based on the obstacle’s distance and

location relative to the vehicle.
If an obstacle is detected in the left and/or right

rear region, the display will show a single arc in the

left and/or right rear region and the system will

produce a tone. As the vehicle moves closer to the

obstacle, the display will show the single arc

moving closer to the vehicle and the tone will

change from a single 1/2 second tone to slow, to

fast, to continuous.

Single 1/2 Second Tone

Slow Tone

Fast Tone

Continuous Tone

20_DS_OM_EN_USC_t.book Page 188

Summary of Contents for 1500 CLASSIC 2020









































































































































































































































































































































































Search results

Summary of Contents for 1500 CLASSIC 2020

Reviews:

Related manuals for 1500 CLASSIC 2020

Brands by name

Popular brands

RAM 1500 CLASSIC 2020, Owner'S Manual

Search results

Summary of Contents for 1500 CLASSIC 2020

Reviews:

Related manuals for 1500 CLASSIC 2020

Brands by name

Popular brands