STARTING PROCEDURES
Before starting your vehicle, adjust your seat, adjust both inside and outside mirrors,
and fasten your seat belt.
The starter should not be operated for more than 10-second intervals. Waiting a few
seconds between such intervals will protect the starter from overheating.
WARNING!
• When leaving the vehicle, always make sure the keyless ignition node is in the
"OFF" mode, remove the key fob from the vehicle and lock the vehicle.
• Never leave children alone in a vehicle, or with access to an unlocked vehicle.
Allowing children to be in a vehicle unattended is dangerous for a number of
reasons. A child or others could be seriously or fatally injured. Children should
be warned not to touch the parking brake, brake pedal or the gear selector.
• Do not leave the key fob in or near the vehicle, or in a location accessible to
children, and do not leave the ignition of a vehicle equipped with Keyless
Enter-N-Go in the ACC or ON/RUN mode. A child could operate power windows,
other controls, or move the vehicle.
• Do not leave children or animals inside parked vehicles in hot weather. Interior
heat build-up may cause serious injury or death.
Normal Starting Using ENGINE START/STOP Button
To Turn On The Engine Using The ENGINE START/STOP Button
1. The transmission must be in PARK.
2. Press and hold the brake pedal while pushing the ENGINE START/STOP button
once.
3. The system takes over and attempts to start the vehicle. If the vehicle fails to start,
the starter will disengage automatically after 10 seconds.
4. If you wish to stop the cranking of the engine prior to the engine starting, push the
button again.
NOTE:
Normal starting of either a cold or a warm engine is obtained without pumping or
pressing the accelerator pedal.
O P E R A T I N G Y O U R V E H I C L E
84
