Ram Trucks 1500, User Manual

Page: 65 / 364

WARNING!
• Adjusting a seat while driving may be dangerous. Moving a seat while driving
could result in loss of control which could cause a collision and serious injury or
death.
• Seats should be adjusted before fastening the seat belts and while the vehicle
is parked. Serious injury or death could result from a poorly adjusted seat belt.
• Do not ride with the seatback reclined so that the shoulder belt is no longer
resting against your chest. In a collision, you could slide under the seat belt,
which could result in serious injury or death.
CAUTION!
Do not place any article under a power seat or impede its ability to move as it may
cause damage to the seat controls. Seat travel may become limited if movement
is stopped by an obstruction in the seat’s path.
Passenger’s Power Seat — If Equipped
Some models are equipped with a six-way power passenger seat. The power seat
switch is located on the outboard side of the seat. The switch is used to control the
movement of the seat and seat cushion.
Power Lumbar — If Equipped
Vehicles equipped with power driver or passenger seats may be also be equipped with
power lumbar. The power lumbar switch is located on the outboard side of the power
seat. Push the switch forward to increase the lumbar support. Push the switch
rearward to decrease the lumbar support.
Driver Memory Seat — If Equipped
This feature allows the driver to store up to two different memory profiles for easy
recall through a memory switch. Each memory profile contains desired position
settings for the driver’s seat, side mirrors, adjustable pedals (if equipped) and a set
of desired radio station presets. Your remote keyless entry key fob can also be
programmed to recall the same positions when the unlock button is pushed.
G E T T I N G S T A R T E D
63