RAM® TOUGH-TRAY II™ ASSEMBLY GUIDE (SIDE B)
2.
COMPRESS SPRING INTO
TRAY USING A PHILIPS HEAD
SCREW DRIVER. WHEN SPRING
REACHES PAST COUNTERSUNK
HOLE, WEDGE SPRING IN
PLACE WITH (K) SCREW.
3.
WITH SPRING WEDGED IN
PLACE, ATTACH (N) SCREW
THROUGH COUNTERSUNK
HOLE. ONCE TIGHTENED,
REMOVE (K) SCREW FROM
SPRING.
FOR FLAT-STYLE ARMS:
SNAP (F) L-BRACKET INTO EITHER (D) OR
(E) SIDE ARMS.
FOR FLEX-STYLE ARMS:
SLIDE (J) CAPS ONTO ENDS OF (G) OR (H)
FLEX ARMS. CUT 1” FROM END IF
ATTACHING TO (H) FLEX ARMS.
ATTACH SELECTED ARMS USING (K) SCREWS AND (M) NUTS. BEFORE
TIGHTENING, ADJUST ARMS APPROPRIATELY TO BEST FIT DEVICE.
OPTIONAL: EXTRA SIDE ARMS MAY BE ADDED TO FRONT AND BACK
OF TRAY FOR ADDITIONAL SUPPORT.
USE (L) SCREWS AND (M) NUTS TO ATTACH TOUGH-TRAY II™
TO ANY RAM MOUNT.
4.
SELECT PREFERRED SIDE ARMS FOR YOUR DEVICE.
RMR-INS-2346
RAM Mounting Systems
8410 Dallas Ave S
Seattle, WA 98108
Phone: (206) 763-8361
Fax: (206) 763-9615
www.rammount.com
[email protected]
RAM® TOUGH-TRAY II™ ASSEMBLY GUIDE (SIDE B)
2.
COMPRESS SPRING INTO
TRAY USING A PHILIPS HEAD
SCREW DRIVER. WHEN SPRING
REACHES PAST COUNTERSUNK
HOLE, WEDGE SPRING IN
PLACE WITH (K) SCREW.
3.
WITH SPRING WEDGED IN
PLACE, ATTACH (N) SCREW
THROUGH COUNTERSUNK
HOLE. ONCE TIGHTENED,
REMOVE (K) SCREW FROM
SPRING.
FOR FLAT-STYLE ARMS:
SNAP (F) L-BRACKET INTO EITHER (D) OR
(E) SIDE ARMS.
FOR FLEX-STYLE ARMS:
SLIDE (J) CAPS ONTO ENDS OF (G) OR (H)
FLEX ARMS. CUT 1” FROM END IF
ATTACHING TO (H) FLEX ARMS.
ATTACH SELECTED ARMS USING (K) SCREWS AND (M) NUTS. BEFORE
TIGHTENING, ADJUST ARMS APPROPRIATELY TO BEST FIT DEVICE.
OPTIONAL: EXTRA SIDE ARMS MAY BE ADDED TO FRONT AND BACK
OF TRAY FOR ADDITIONAL SUPPORT.
USE (L) SCREWS AND (M) NUTS TO ATTACH TOUGH-TRAY II™
TO ANY RAM MOUNT.
4.
SELECT PREFERRED SIDE ARMS FOR YOUR DEVICE.
RMR-INS-2346
RAM Mounting Systems
8410 Dallas Ave S
Seattle, WA 98108
Phone: (206) 763-8361
Fax: (206) 763-9615
www.rammount.com
[email protected]
