RAM Commercial ProMaster 2015 Owner'S Manual Download Page 14 | Manualshive

Page: 14 / 431

RAM Commercial ProMaster 2015 Owner'S Manual Download Page 14

WARNING!

•

Before exiting a vehicle, always apply the parking
brake, shift the transmission into PARK and re-
move the Key Fob from the vehicle. When leaving
the vehicle, always lock your vehicle.

•

Never leave children alone in a vehicle, or with
access to an unlocked vehicle.

•

Allowing children to be in a vehicle unattended is
dangerous for a number of reasons. A child or
others could be seriously or fatally injured. Chil-
dren should be warned not to touch the parking
brake, brake pedal or the gear selector.

•

Do not leave the Key Fob in or near the vehicle, or
in a location accessible to children. A child could
operate power windows, other controls, or move
the vehicle.

(Continued)

Ignition Switch Positions

1 — STOP (OFF/LOCK)
2 — MAR (ACC/ON/RUN)
3 — AVV (START)

12

THINGS TO KNOW BEFORE STARTING YOUR VEHICLE

«
...
12
13
14
15
16
...
»

Summary of Contents for ProMaster 2015
















































































































































































































































































































































































































































Reviews:

No comments