RAM Commercial CHASSIS CAB 2022 Owner'S Manual Download Page 328

Page: 328 / 428

326

IN CASE OF EMERGENCY

Proper towing or lifting equipment is required to

prevent damage to your vehicle. Use only tow bars

and other equipment designed for this purpose,

following equipment manufacturer’s instructions.

Use of safety chains is mandatory. Attach a tow bar

or other towing device to main structural members

of the vehicle, not to fascia/bumpers or associated

brackets. State and local laws regarding vehicles

under tow must be observed.
If you must use the accessories (wipers,

defrosters, etc.) while being towed, the ignition

must be in the ON/RUN mode, not the ACC mode.
If the key fob is unavailable or the vehicle's battery

is discharged,

page 323.

-W

HEEL

RIVE

ODELS

FCA US LLC recommends towing your vehicle with

all four wheels OFF the ground using a flatbed.
If flatbed equipment is not available, and the

transmission is operable, the vehicle may be towed

(with the rear wheels on the ground) under the

following conditions:



The transmission must be in NEUTRAL

page 323.



The towing speed must not exceed 30 mph

(48 km/h).



The towing distance must not exceed 15 miles

(24 km) for 6–speed transmission, or 30 miles

(48 km) for 8–speed transmission.

If the transmission is not operable, or the vehicle

must be towed faster than 30 mph (48 km/h) or

farther than 15 miles (24 km) for 6–speed

transmission, or 30 miles (48 km) for 8–speed

transmission, tow with the rear wheels OFF the

ground. Acceptable methods are to tow the vehicle

on a flatbed, or with the front wheels raised and

the rear wheels on a towing dolly, or (when using a

suitable steering wheel stabilizer to hold the front

wheels in the straight position) with rear wheels

raised and the front wheels ON the ground.

OUR

-W

HEEL

RIVE

ODELS

FCA US LLC recommends towing with all wheels

OFF the ground. Acceptable methods are to tow

the vehicle on a flatbed or with one end of vehicle

raised and the opposite end on a towing dolly.
If flatbed equipment is not available, and the

transfer case is operable, the vehicle may be

towed (in the forward direction, with ALL wheels on

the ground), IF the transfer case is in NEUTRAL and

the transmission is in PARK

page 185.

CAUTION!



Do not use sling type equipment when towing.

Vehicle damage may occur.



When securing the vehicle to a flatbed truck,

do not attach to front or rear suspension

components. Damage to your vehicle may

result from improper towing.

CAUTION!

Towing this vehicle in violation of the above

requirements can cause severe engine and/or

transmission damage. Damage from improper

towing is not covered under the New Vehicle

Limited Warranty.

CAUTION!



Front or rear wheel lifts must not be used (if

the remaining wheels are on the ground).

Internal damage to the transmission or

transfer case will occur if a front or rear wheel

lift is used when towing.



Towing this vehicle in violation of the above

requirements can cause severe transmission

and/or transfer case damage. Damage from

improper towing is not covered under the New

Vehicle Limited Warranty.

22_DPF_OM_EN_USC_t.book Page 326

Summary of Contents for CHASSIS CAB 2022













































































































































































































































































































































































































































Search results

Summary of Contents for CHASSIS CAB 2022

Reviews:

Related manuals for CHASSIS CAB 2022

Brands by name

Popular brands

RAM Commercial CHASSIS CAB 2022, Owner'S Manual

Search results

Summary of Contents for CHASSIS CAB 2022

Reviews:

Related manuals for CHASSIS CAB 2022

Brands by name

Popular brands