RAM Commercial Chassis Cab 2017 Owner'S Manual Download Page 515

Page: 515 / 542

Maintenance Chart

Required Maintenance

Refer to the Maintenance Schedules on the following pages
for required maintenance.

At Every Oil Change Interval As Indicated By Oil

Change Indicator System:

•

Change oil and filter.

•

Rotate the tires.

Rotate at the first sign of irregular

wear, even if it occurs before the oil indicator
system turns on.

•

Inspect engine cooling system protection and hoses.

•

Inspect exhaust system.

•

Inspect engine air cleaner if using in dusty or
off-road conditions.

At Every Oil Change Interval As Indicated By Oil

Change Indicator System:

•

Inspect battery and clean and tighten terminals as
required.

•

Inspect automatic transmission fluid if equipped
with dipstick.

•

Inspect brake pads, shoes, rotors, drums, hoses and
park brake.

•

Inspect front end, and lubricate — If equipped with
serviceable fittings.

•

Lube the front drive shaft fitting (4X4 models only).

MAINTENANCE SCHEDULES

513

Summary of Contents for Chassis Cab 2017































































































































































































































































































































































































































































































































































Search results

Summary of Contents for Chassis Cab 2017

Reviews:

Related manuals for Chassis Cab 2017

Brands by name

Popular brands

RAM Commercial Chassis Cab 2017, Owner'S Manual

Search results

Summary of Contents for Chassis Cab 2017

Reviews:

Related manuals for Chassis Cab 2017

Brands by name

Popular brands