RAM Commercial Chassis Cab 2017 Owner'S Manual Download Page 230

Page: 230 / 542

Vehicles Equipped With Passive Entry

1. Without pushing the brake pedal, push the ENGINE

START/STOP button and place the ignition to the
ON/RUN position (do not start the engine).

2. Push and release the

down

arrow button to scroll

downward through the main menu to “Vehicle Info.”

3. Push and release the

right

arrow button to access the

”Vehicle Info” screen, then scroll up or down to select
“Oil Life.”

4. Push and hold the

right

arrow button to select “Reset”.

5. Push and release the

down

arrow button to select “Yes,”

then push and release the

right

arrow button to select

reset of the Oil Life to 100%.

6. Push and release the

arrow button to exit the

instrument cluster display screen.

Vehicles Not Equipped With Passive Entry

1. Without pushing the brake pedal, cycle the ignition to

the ON/RUN position (do not start the engine).

2. Push and release the

down

arrow button to scroll

downward through the main menu to “Vehicle Info.”

3. Push and release the

right

arrow button to access the

“Vehicle Info” screen then scroll up or down to select
“Oil Life.”

4. Push and hold the

right

arrow button to select “YES” by

pushing the

right

arrow then push and release the

right

arrow button to select reset of the Oil Life to 100%.

5. Push and release the

arrow button to exit the

instrument cluster display screen.

NOTE:

If the indicator message illuminates when you start

the vehicle, the Oil Life indicator system did not reset. If
necessary, repeat this procedure.

Instrument Cluster Display Selectable Menu Items

Push and release the

down

arrow button until the

desired selectable menu icon is highlighted in the instru-
ment cluster display.

Speedometer

Push and release the

down

arrow button until the

speedometer menu item is highlighted in the instrument
cluster display. Push and release the

right

arrow button to

cycle the display between mph and km/h.

228

UNDERSTANDING YOUR INSTRUMENT PANEL

Summary of Contents for Chassis Cab 2017































































































































































































































































































































































































































































































































































Search results

Summary of Contents for Chassis Cab 2017

Reviews:

Related manuals for Chassis Cab 2017

Brands by name

Popular brands

RAM Commercial Chassis Cab 2017, Owner'S Manual

Search results

Summary of Contents for Chassis Cab 2017

Reviews:

Related manuals for Chassis Cab 2017

Brands by name

Popular brands