RAM Commercial 2018 PROMASTER Owner'S Manual Download Page 305

Page: 305 / 337

Restore Settings — If Equipped
After pressing the “Restore Settings” button on the touch-

screen, the following settings will be available:

Setting Name

Selectable Options

Restore Settings

Yes

Cancel

NOTE:

When this feature is selected, it will reset the Display, Clock, Audio, and Radio Settings to their default set-

tings. Once the settings are restored, a pop up appears stating

⬙

settings reset to default.

⬙

Press the okay button on the

touchscreen to exit.

Clear Personal Data
After pressing the “Clear Personal Data Settings” button on

the touchscreen, the following settings will be available:

Setting Name

Selectable Options

Clear Personal Data

Yes

NOTE:

When this feature is selected, it will remove personal data including Bluetooth devices and presets.

MULTIMEDIA

303

Summary of Contents for 2018 PROMASTER


















































































































































































































































































































































Search results

Summary of Contents for 2018 PROMASTER

Reviews:

Related manuals for 2018 PROMASTER

Brands by name

Popular brands

RAM Commercial 2018 PROMASTER, Owner'S Manual

Search results

Summary of Contents for 2018 PROMASTER

Reviews:

Related manuals for 2018 PROMASTER

Brands by name

Popular brands