2.2 Software Installation
2.2.1 Overview
The Adapter’s Setup Wizard will guide you through the Installation
procedure.
Note: When you install the hardware before installing the software, the
system will prompt
“Found New Hardware Wizard”, click Cancel, and run the Setup Wizard
program on the
CD-ROM.
2.2.2 Software installation in Windows XP
1.Insert the Resource CD into your CD-ROM drive, open the CD driver
and choose the setup program, execute it. Figure 2-1 should then
appear.
2.You can click No to end the installation on the Preparing Setup
screen, figure 2-1. Click Yes to continue the installation process, next
installation screen will appear as Figure 2-2.
Figure 2-1 Ralink Wireless Card Setup Wizard
3
