Raleigh Pedelec Impulse, Original Manual

Page: 85 / 206

16 III User Manual Pedelec with centre motor
4.2.1.8 Automatic switch-off
If you stop your Pedelec and it does not move for 10 min-
utes, the system switches off automatically. If you want to
use the assistance again, you will have to switch it back
on via the control panel.
4.2.1.9 Measurement and display ranges
DESCRIPTION DISPLAY RANGE
Speed 0.0 – 99.9 km / h
Journey length 0.0 – 99999 km
(once the distance reaches
9999.9 km, this is dis-
played without a decimal
place.)
Average speed 0 – 99.9 km / h
Top speed 0.0 – 99.9 km / h
Total journey length 0.0 – 99999 km
(once the distance reaches
9999.9 km, this is dis-
played without a decimal
place.)
4.2.1.10 Battery charge state indicator
Battery charge state indicator
This indicator helps you save power when riding which
means you can travel further.
The remaining battery charge is shown in 5 stages.
DISPLAY BATTERY CHARGE STATE
5 LEDs light up ••••• 80 – 100%
4 LEDs light up •••• 60 – 80%
3 LEDs light up ••• 40 – 60%
2 LEDs light up •• 20 – 40%
1 LED lights up • 10 – 20%
1 LED flashes
¡
< 10%
no display – 0%
E: Battery is empty
F: Battery is full
4.2.1.11 Power output indicator
The power output indicator shows the actual power output
being requested and the actual power consumption in 6
stages (bars). This indicator helps you save power when
riding which means you can travel further. The fewer of
the 6 bars that are displayed, the lower the actual power
output of the motor and the consumption. If more bars are
visible, the power output and consumption of the motor is
higher.
IF YOU CAN
SEE... THE BATTERY IS SUPPLYING
A CURRENT OF
6 bars more than 20 amperes
5 bars up to 16 – 20 A
4 bars up to 12 – 16 A
3 bars up to 8 – 12 A
2 bars up to 2 – 8 A
1 bar up to 0 – 2 A
If the power consumption is very low, no bars are
displayed.