background image

Electrical System Technical Manual

Guarantee conditions and legal requirements

6

The supplier of the battery pack will give a guarantee for any material or construction faults concerning the battery pack if 

the following conditions are met:
You only have a right to the guarantee if you can provide a certificate of guarantee or a receipt. The guarantee period 

commences on the day of purchase. The guarantee will be null and void when deep discharge is established.
The manufacturer is not responsible for accidents or faults caused by improper use of (parts of) the e-bike.

Guarantee period of the e-bike

The guarantee period of the electronic parts of your e-bike (display, drive system and battery pack) is two years. For the 

guarantee period of all other parts we refer to the warranty provisions as specified in the manufacturer’s manual.
•  The guarantee does not cover normal wear and aging.
•  Do not clean the bicycle with a high-pressure spraying pistol. A too powerful jet of water may damage the electronics. 

This will then make the guarantee null and void.

Legal requirements

The described conveyance is a bicycle according to European legislation, because the bicycle complies with the following 

rules:
•  The support is only active when the user peddles himself as from 6 km/hour.
•  The support is active for up to 25 km/hour.
•  The supplied power is maximum 250 W.

Environment

We recommend that you return a defective battery pack to your dealer in accordance with the environmental 

regulations for collecting and processing batteries drawn up by the Ministry of Housing, Spatial Planning 

and the Environment. The dealer is obliged to accept the battery and must ensure further processing of it 

by the manufacturer.

Periodical maintenance and faults

Your e-bike needs regular service. Your dealer can advise and inform you on how to make optimum use of your bicycle. 

In case of any questions or problems concerning your e-bike, please contact your dealer.

Manual

This manual is version 11-2015.

Summary of Contents for Array
















Reviews: