MANUALE ISTRUZIONI / INSTRUCTIONS MANUAL
MTR605/025/DASM - R605/027/DASM - R605/170/DASM
Modello/Model R605DASM
O/ 1
so
stituzio
ni_d
asm.fm
O - S
UBSTITUTIONS
,
DISASSEMBLY
,
TRANSPORT
S
UBSTITUTION
OF
THE
I
RIS
M
OTOR
• Disconnect supply
• Remove the cover
• Unscrew the screw “
A
” and the hexagonal spacer “
B
”- see
Figure 1
- chapter
A
DJUSTMENTS
• Rotate the support plate and unscrew the two motor fixing screws.
• Disconnect the board cable from connector J5V1.
• Substitute the motor with an identical item.
• Fasten the screw “
A
” and the hexagonal spacer “
B
” - not tighten.
• Re-mount the motor support plate.
• Adjust play between motor- and intermediate-gear - see
A
DJUSTMENTS
• Tighten the screw “
A
” and the hexagonal spacer “
B
”
• Connect the motor cable to the board.
• Re-mount the cover.
S
UBSTITUTION
OF
THE
I
RIS
P
HOTOCELL
• Disconnect supply.
• Remove the cover
• Unscrew the two screws “
F
” - see
Figure 1
- chapter
A
DJUSTMENTS
.
• Disconnect cables from the board.
• Remove the photocell support
• Substitute the photocell with an identical item.
• Connect the photocell cables to the board on connector J3V1 as follows:
Pin 1
not connected
Pin 2
not connected
Pin 3
black
Pin 4
red
Pin 5
white
Pin 6
green
• Remove the photocell support through the two screws “F”
• Adjust the photocell position - see
A
DJUSTMENTS
• Re-mount the cover.
S
UBSTITUTION
OF
SHUTTER
M
OTORS
• Disconnect supply.
• Remove the cover.
• Unscrew the two screws “
C
” - see
Figure 3
- chapter
A
DJUSTMENTS
.
• Disconnect cables from the board: J5V2 rotation - J5V3 travel
• Fasten the two screws “
C
” not tighten.
• Substitute the motor with an identical item.
T
HE
FOLLOWING
OPERATIONS
MUST
BE
PERFORMED
BY
AUTHORISED
PER
-
SONNEL
WITH
TECHNICAL
TRAINING
.
