rako WP-CONC Manual Download Page 3

Page: 3 / 3

Rako Controls Ltd

WP-CONC.doc

Page 3 of 3

Issue A. April 2010

UNTERM

TERM

STAR
TERM

TERMINATION
JUMPERS ON WP-CONC

NOTE: Devices are normally
supplied unterminated with
jumpers in this position

Figure 4

WP-CONC which is not at end
of line set like this.
(WP-CONC1 in figure 1)

WP-CONC which is at end of line
set like this.
(WP-CONC2 in figure 1)

This setting used

only

if a

RAKO STAR WIRING box is
fitted to the system.

See Star Box User Manual for
details

Fit Termination Jumpers to WP-CONC when it is fitted at end of Data Network

Summary of Contents for WP-CONC

Page 1: ...elsewhere Figure 1 shows a simple lighting installation using the Rako Wired system In figure 1 WP CONC 2 and the RAKLink are at each end of the cable so these must have their termination jumpers fit...

Page 2: ...ystem Items required Fit the WP CONC as shown in figure 3 below Figure 2 Figure 3 Installing WP CONC ChocBox Housing Tools not included Fit Housing into position Punch CAT5 cable to circuit board foll...

Page 3: ...with jumpers in this position Figure 4 WP CONC which is not at end of line set like this WP CONC1 in figure 1 WP CONC which is at end of line set like this WP CONC2 in figure 1 This setting used only...

Brands by name