rako WP-CONC Manual Download Page 2

Page: 2 / 3

Rako Controls Ltd

WP-CONC.doc

Page 2 of 3

Issue A. April 2010

Circuit boards Assembly

Installing WP-CONC onto the Wired System

Items required:

Fit the WP-CONC as shown in figure 3 below:

Figure 2

Figure 3

Installing WP-CONC

ChocBox Housing

Tools (not included)

Fit Housing into position

Punch
CAT5 cable to circuit
board following colour
code marked on board

Connect the Rako Accessory module and fit
into housing. Be sure to set correct jumpers

Summary of Contents for WP-CONC

Page 1: ...elsewhere Figure 1 shows a simple lighting installation using the Rako Wired system In figure 1 WP CONC 2 and the RAKLink are at each end of the cable so these must have their termination jumpers fit...

Page 2: ...ystem Items required Fit the WP CONC as shown in figure 3 below Figure 2 Figure 3 Installing WP CONC ChocBox Housing Tools not included Fit Housing into position Punch CAT5 cable to circuit board foll...

Page 3: ...with jumpers in this position Figure 4 WP CONC which is not at end of line set like this WP CONC1 in figure 1 WP CONC which is at end of line set like this WP CONC2 in figure 1 This setting used only...

Brands by name