3
3 Discovering the HUB and Setting the House Number
Before proceeding with any programming the HUB needs to be
discovered and the House number set. This is done via a webpage
setup wizard.
3.1 Discovering the HUB
Open Rasoft Pro programming software. Ensure that the laptop is
connected to the same network as the HUB.
The HUB should appear in the “Communication” window in the
bottom right of the software with a red stop sign. If it does not
appear press “Refresh”.
3.2 Setting up the HUB using the Webpage Wizard
To access the HUB Webpages right click the communication device
in the bottom right of the software. Select “Open in Browser”
WK-HUB
Manual Version 1.0.0
