background image

 

 

11 

Output Action 
The Output action section on the right hand side of the screen will define the command to be 
sent when the conditions in “Event Trigger”/“Active Days” are met.  
 

NB 

The “Action” drop down menu is used to select the command sent when the event is triggered. 
Typically these will be scene commands but it is possible to trigger and control Macros, Holiday 
settings etc.   

8.2 Setting Events via the HUB webpages  

Events can be set via the “Activities” section of the HUB webpages. Navigate to this by 
selecting “Activities” from the menu to the left hand side of the HUB webpages and then 
selecting “Create Custom Activity”. 
 

 

 

A note on “Activities”:  

“Activities” refers generically to any HUB “Action” for example: Mappings (including Audio maps) and 
Events.  
 
This section is still in a beta state, it is advised that you limit the use of the section to:  
 

-

Mapping Sonos audio commands 

-

Creating Events  

 
Mapping and events created in Rasoft Pro will appear here (as above) but will not be editable.  
 
Please consult Rako technical support if you have any questions about “Activities”  

Events can be created using the interface below, this interface works in a very similar way to 
that found in Rasoft Pro and the App.  

WK-HUB

                   Manual Version 1.0.0 

Summary of Contents for WK


















Reviews: