RAKINDA F2-H, Manual

Page: 15 / 16

2. Schematic diagram of magnetic door system wiring:
Installation Notice:
1. During wiring, if the 12V power supply line of the host does not use the "special power supply extension
line" and the distance is long, the cable equivalent resistance will be too high, then it is possible to occur:
terminal insufficient voltage (
≤
11V), repeated restart of the host, and crash phenomenon
。
2. The device has a built-in relay device. The maximum load voltage of the magnetic lock (or other access
control unit) cannot exceed DC12V, and the maximum current cannot exceed 3A. If it exceeds, it will break
the relay and cause the door to fail to open.
3.
The device comes with a power adapter as shown in the figure, with a total length of 1 meter. Its weak
current part is 40cm and the high voltage part is 40cm.