Raket R 95, Owner'S Manual

Page: 10 / 15

18
R 95 Manual - English R 95 Manual - English
19
altered or modified in any way. The attach -
ment of the silencer onto the cart is open to
choice, but it must be of such a nature that
the original silencer can be used without any
alterations whatsoever.
The exhaust system for Micro has a restrictor
washer assembled at the cylinder connection.
The restrictor washer has a diameter of 14
mm.
One can divide the silencer by drilling out
the rivets and replacing them with suitable
screws. When the silencer is divided one is
able to check on the amount of damping
material. This should be done at least once
every season, or when you notice a change to
the sound of the exhaust.
11. Centrifugal clutch
The clutch is an one piece steel clutch with
expandable arms.
The clutch is a security feature and absolutely
no alterations or modifications are allowed. In
other words it is not permitted to change the
clutch weights or the clutch springs in order
to alter the number of rpm at which the slip
clutch engages.
The clutch should be fully engaged at max
5,000 rpm.
The clutch drum has a sprocket with 11 teeth.
12. Covers
The covers are safety features designed to
avoid contact with the rotating and warm
parts of the engine, and absolutely no altera -
tions or modifications are permitted. The kart
may not be driven without the covers.
13. Starter system
The engine is equipped with an electric
starter system as standard. The starter motor
should be an original R 95.
The engine may even be equipped with a
manual starter system also known as a Mag -
napull starter.
This means that a flange hub may be as -
sembled onto the flywheel.
cable.
7. Carburettor flange
The carburettor flange should always be
assembled and labelled with article number
35061.
8. Inlet flange
The rubber inlet flange should be labelled
with article number 35065 and may not be al -
tered in any way. The dividing plate of treated
Bakelite should be assembled.
9. Ignition system
The ignition system should be original Selettra
and no modifications are allowed.
The ignition coil and flywheel should be
labelled with Selettra. The minimum weight
is 390g.
The flywheel wedge should be assembled and
may not be altered.
The picture illustrates the flywheel with
flange hub for manual starting. The hub
should not be removed.
10. Exhaust system
The exhaust system, consisting of cylinder
connection and complete silencer, may not be