Documentation Center
RAK4260 Module Quick Start Guide
Prerequisites
What Do You Need?
Before going through the quick start guide of the RAK4260 WisDuo LPWAN Module, make sure to prepare the
necessary items listed below:
Hardware Tools
1. RAK4260 LPWAN Module
2. USB to TTL Converter
3. RAKDAP1 DAPLink Tool
4. Gateway in range for testing
5. Windows PC
Software Tools
1.
2.
RAK Device Firmware Upgrade (DFU) Tool
3.
4.
Product Configuration
Interfacing with RAK4260
During the configuration of the module, a guided setup is available on the console output. You can connect to the
console of the RAK4260 module through the UART interface.
Connect to the RAK4260
In this document, a RAK4260 module is used as an example. Use a USB to TTL converter to connect to the
module.
1. Connect the RAK4260 to the USB port of a general-purpose computer (Windows PC) using a USB to TTL
module (3.3 V), as shown in Figure 1.
