RAK411 PROGRAMMING MANUAL
V1.7
COPYRIGHT ©
SHENZHEN RAKWIRELESS TECHNOLOGY CO., LTD
ETDX1603021415
14
pwrmode=3------------Mode 3
When enters into this mode, module firstly saves current connective status to RAM, and
shuts down the power of wireless part, then control part enters into deep state. In this state,
module cannot respond to any command or wireless data, lowering consumption to
minimum.User can initiate communication or reset module. It enters into mode 0 by default after
start.
3.7 Operational Process
RAK411 SPI command operation feature completes a few basic steps of WIFI communication,
including network scanning, joining network and obtaining an IP address, and eventually
establishing Socket communication. RAK411 provides a variety of convenient operation to
implement networking, so that customers can easily complete the network configuration, and
concentrate on the management of socket and their own data protocols.
To realize automatic networking management, customers can take advantage of WEB, WPS
and EasyConfig configuration features. The module will automatically store paramenters after a
successful configuration, and these automatic networking commands can be used any time,
letting the module automatically complete networking operation, and returning the results.
The basic operation of the process is as follows:
