Raisecom RC902-FE4E1-BL User Manual Download Page 4

Page: 4 / 21

CONTENTS

Chapter 1

Overview

-------------------------------------------------------------------------------------- 7

1.1 Instruction

-----------------------------------------------------------------------------------------------------------------------7

1.2 Features

---------------------------------------------------------------------------------------------------------------------------7

1.3 Ordering information

---------------------------------------------------------------------------------------------------------7

Chapter 2

Technical Parameters

----------------------------------------------------------------------- 8

2.1 E1 interface technical data

---------------------------------------------------------------------------------------------------8

2.2 Optical interface technical data

---------------------------------------------------------------------------------------------8

2.3 Power supply

--------------------------------------------------------------------------------------------------------------------8

2.4 Operating environment

-------------------------------------------------------------------------------------------------------8

2.5 Storing environment

-----------------------------------------------------------------------------------------------------------8

2.6 Device outline

--------------------------------------------------------------------------------------------------------------------8

Chapter 3

Device Panel Appearance and Instruction

---------------------------------------------- 9

3.1 Device panel appearance

------------------------------------------------------------------------------------------------------9

3.2 Indicator definition

-------------------------------------------------------------------------------------------------------------9

3.3 Interface instruction

--------------------------------------------------------------------------------------------------------- 10

Chapter 4

Device Setting Instruction

---------------------------------------------------------------- 11

4.1 Dip switch setting instruction

---------------------------------------------------------------------------------------------- 11

4.1.1 Dip switch location

--------------------------------------------------------------------------------------------------------------------------11

4.1.2 Dip switch definition

------------------------------------------------------------------------------------------------------------------------11

4.1.3 Default setting

--------------------------------------------------------------------------------------------------------------------------------15

Chapter 5

Typical Application

------------------------------------------------------------------------- 16

Chapter 6

Network Management Property

-------------------------------------------------------- 17

6.1 Network management platform

------------------------------------------------------------------------------------------- 17

6.2 Network management query

----------------------------------------------------------------------------------------------- 17

6.3 Network management configuration

------------------------------------------------------------------------------------- 17

Chapter 7

Installation

----------------------------------------------------------------------------------- 18

7.1 Pre-installation check-up and preparation

------------------------------------------------------------------------------ 18

7.2 Installation

--------------------------------------------------------------------------------------------------------------------- 18

7.2.1 Device fixing

---------------------------------------------------------------------------------------------------------------------------------18

7.2.2 Cable connecting

-----------------------------------------------------------------------------------------------------------------------------18

7.2.3 Power on

--------------------------------------------------------------------------------------------------------------------------------------18

Appendix A Acronyms

--------------------------------------------------------------------------------------- 19

Appendix B Frequently Asked Questions

---------------------------------------------------------------- 20

Summary of Contents for RC902-FE4E1-BL






















Search results

Summary of Contents for RC902-FE4E1-BL

Reviews:

Related manuals for RC902-FE4E1-BL

Brands by name

Popular brands

Raisecom RC902-FE4E1-BL, User Manual

Search results

Summary of Contents for RC902-FE4E1-BL

Reviews:

Related manuals for RC902-FE4E1-BL

Brands by name

Popular brands