Raisecom Technology Co., Ltd
61
indicates there is no cross connection.
Address indication: result of row number plus column number is the channel number. For
example:
（
5 17
）
,the address is 16+1=17 that is to say the data in this cell is the cross
connection of the 17
th
channel of first E1 (cross group 1)
RC3000 has automatic user-board recognization and automatic channel configuration
functions, and the information saved in EEPROM may be different from that of RAM (real
information), so you can use this command to get the information saved in EEPROM.
10.5.4. Four User Cross Query (EEPROM)
In Cross Set Query menu, press number key
4
and there will be the following
information:
Input Group No.(1-4, Ese=Cancel):
Enter group number 1, cross connection of the first user E1 information (cross group 5)
saved in EEPROM will be displayed:
First User Group Cross Set (EEPROM)
Channel 1 2 3 4 5 6 7 8
cross 0 0 0 | 1 2 | 1 3 | 1 4 | 1 5 | 1 6 | 1 7 | 1 8
8 0 0 | 0 0 | 0 0 | 0 0 | 0 0 | 0 0 | 0 0 | 0 0
16 1 17 | 1 18 | 1 19 | 1 20 | 1 21 | 1 22 | 1 23 | 1 24
24 0 0 | 0 0 | 0 0 | 0 0 | 0 0 | 0 0 | 0 0
CROSS Query Command:1-4, Menu Display:M, Return:Q Command:
Note: in this table the address indicates the output data direction and the contents
indicate the input data direction. Data in each cell consists of two parts, the first part
indicates cross group:
1: cross group 1
2: cross group 2
3: cross group 3
4:
cross group 4
RC3000 does not support the cross connect from user E1 to user E1, so the input data
direction of cross group 5-8 is meaningless. And the second part indicates the channel of
cross group (the first part): 1-31, 0 0 indicates there is no cross connection.
Address indication: result of row number plus column number is the channel number.
RC3000 has automatic user-board recognization and automatic channel configuration
functions, and the information saved in EEPROM may be different from that of RAM (real
information), so you can use this command to get the information saved in EEPROM.
10.6. State Info Query
In main menu press number key 3 there will be state information query menu:
1.Receive
State
Query
2.Transmit State Query
State Query Command:1-2, Menu Display:M, Return:Q Command:
